Branson BC Buffing Compound Remover / 000-955-314

Branson Buffing Compound Cleaning Solution, mixed in a concentration of 6 to 7% by volume, formulated to remove buffing and polishing compounds.

IN STOCK FOR IMMEDIATE DELIVERY
(Same Day Shipping for Orders Placed Before 2:00pm EST)
Orders of $125 SHIP FREE!

For GROUND SHIPPING ONLY; chemicals CANNOT be AIR SHIPPED.

SKU: BC-955-314

Details

Branson BC Buffing Compound Remover formulated Cleaning Concentrate is a biodegradable, phosphate and caustic free cleaner developed for removing buffing compound.

A blend of non-ionic surfactants, detergents, and emulsifiers, Branson BC has been formulated to remove the most difficult buffing compounds and carriers. The non-viscous liquid rapidly removes tripoli, rouge, lime, diamond tripoli, etc. from buffed compounds and it rinses freely and quickly.

Branson BC is mixed with water in a concentration of 6 to 7% by volume and can be used at temperatures ranging from ambient to 180 degrees F (82 degrees C). Optimum cleaning performance is achieved at higher temperatures.

SHIPPING NOTE: Chemicals can only be shipped to destinations within the continental U. S. and Canada. Sorry, but they cannot be air shipped.

Resources

Spec Sheet

View PDF

SDS Sheet

View PDF

Branson Ultrasonic Cleaner Solutions Overview

View PDF
Usage Information

CAUTION

Do not use alcohol, gasoline, bleach, mineral acids, solutions with a flash point, semi-aqueous or combustible liquids in ultrasonic tanks, or you will void the warranty. Only use non-flammable solutions and water-based solutions.


SOLUTION TYPES

Water-based solutions can be either slightly acidic or alkaline. They include detergents, soaps and industrial cleaners designed to remove specific soils.

Acidic water-based solutions: remove rust, tarnish or scale, They range from mild solutions that remove tarnish, to concentrated, inhibited acidic solutions that remove investment plaster, milk-stone, zinc oxide and rust from steel and cast iron as well as smut and heat-treat scale from hardened steel.

Alkaline water-based solutions: remove oil, grease, coolants, waxes, including carbonates, silicates and caustics. These cause emulsifying action, which keeps soil from redepositing on the cleaned surface, and improves cleaning action in hard water.

Change the cleaning solution periodically. Cleaning solutions can become contaminated with suspended soil particles which coat the tank bottom. This coating dampens the ultrasonic action and reduces cleaning efficiency. Certain solutions will cavitate better than others.

Heat and cavitation increases the chemical activity of cleaning solutions. Some materials may be damaged by this stronger chemical action. When in doubt, test run samples of items to be cleaned.

Caustic solutions: used to remove rust from steels, metal alloy corrosion and a variety of tenacious soils.


SOLUTION AMOUNTS

Solution amounts may vary. The amount you use depends on the detergent and the type of soil to be removed. Follow instructions on the solution container and refer to the next tab's table for the effects of solutions on metals.


APPLICATION DATA

Use Case PDF for Laboratory GlassUse Case PDF for Plastic Tool ModelsUse Case PDF for Plumbing and Copper
Laboratory Glass: Use case with Branson OC Formulated ConcentratePlastic Tool Models: Use case with Branson IS Formulated ConcentrateCopper Plumbing Fittings: Use case with Branson OR Formulated Concentrate
Solution Effects on Metals
WARNINGS